Stepper and Servo Motor Drives
NI MID-7604, NI MID-7602
• High-efficiency, bipolar chopper
stepper drives
• User-selectable microstepping
and peak current
• Integrated power supply
• CE approved and UL recognized
NI MID-7654, NI MID-7652
• High-efficiency servo amplifiers
• User-selectable peak current
and continuous current
• Integrated power supply
• CE approved and UL recognized
Overview and Applications
These compact, well integrated drives incorporate per-axis
The National Instruments MID-760x integrated stepper motor amplifiers, motor-power DC bus supplies, low-voltage motion I/O
power drives and MID-765x integrated DC-brush servo motor supplies, and pluggable screw terminal connectivity in a single
power drives offer reliable, easy-to-connect drive solutions for rugged metal enclosure. This optimized system wiring design
National Instruments motion controllers. The NI MID-760x simplifies motion component selection.
provides stepper motor control from the NI 7330, 7340, and 7350
controllers. The MID-7650 provides DC-brush servo motor control High-Efficiency Architecture
from NI 7340 and 7350 controllers. Because the MID-760x and the The MID-760x power drives incorporate an efficient bipolar chopper
MID 7650 have all the required motion drive and motion I/O signals, architecture that converts step and direction control signals into
they offer all the features of a universal motion interface wiring winding currents for 2-phase stepper motors. The MID-765x power
module with the enhancements of a powered motor drive in a single drives incorporate an efficient servo amplifier architecture that
product. The NI MID power drives connect to motion controller converts analog control signals into winding currents for DC-brush
boards through a single-shielded cable that transfers all motor motors. The pulse width modulation driver technology in the
commands, as well as motion I/O control and feedback signals.
MID-765x accurately controls motor winding current, while
The MID-7604 and MID-7602 are 4-axis and 2-axis stepper motor reducing motor heating, lowering ripple current, and improving
drive units, respectively. The MID-7654 and MID-7652 are 4-axis overall motor performance. Active fan cooling provides optimal
and 2-axis DC-brush servo motor drive units, respectively.
motion power drive operation.
Compact
Front Panel
Front Panel
NI 7350
NI 7340
✓
✓
✓
Motor Drive
(A)
0.2 to 1.4
0.2 to 1.4
0.8 to 5 continous
10 peak
Current/Axis
Diagnostic LEDs
Enclosure and
Microstepping
Selectable
Peak Current
Selectable
Axes
Model
Stepper
Servo
NI 7330
(V)
24
24
48
MID-7604
MID-7602
MID-7654
✓
✓
–
–
–
✓
✓
✓
–
✓
✓
✓
✓
✓
–
✓
✓
✓
4
2
4
MID-7652
–
✓
–
✓
48
0.8 to 5 continous
10 peak
✓
–
✓
2
Figure 1. Stepper and Servo Motor Drive Features
642 National Instruments • Tel: (800) 433-3488 • Fax: (512) 683-9300 • info@ni.com • ni.com
|
Multi Tech Systems Network Router MT128SMI User Manual
Murphy Automobile Accessories Initial Twin Engine User Manual
Nilfisk ALTO Stereo Equalizer AMX 140FX User Manual
NordicTrack Home Gym NTL190071 User Manual
Nortel Networks IP Phone NN43114 100 User Manual
Nortel Networks Switch 425 24T User Manual
Panasonic Battery Charger EY0L80 U1 User Manual
Panasonic CD Player DEH 4500BT User Manual
Panasonic CRT Television CT 27SC13 User Manual
Panasonic DVD Player DVD S42 User Manual